CNC Programming Book, Machine CNC, CNC Programming Basics

What Is CNC Programming And Why Is It Used In Precision Machinery?

There are many different kinds of programming languages, ranging from the popular Java language to lesser known CNC programming languages. A CNC, or computer numerical controlled, programming language is a simplistic language that is commonly used to guide precision machinery such as milling and lathe programming. They are usually based off a Cartesian plane, in that the programming can guide the machine according to a set of coordinates from the origin point.

This is an important language, because without it, many of the precision machines used in the labor side of businesses would not be as accurate and large-scale manufacturing would begin to show some slight errors in the products. There are several CNC programming books available for the people who want to learn about how to program this way, but it is a language that is rarely used outside of machinery these days.

Certain computer programming classes still use CNC programming books to introduce students to the concept of CNC programming, but because it is pretty much only used in the current world for precision machinery, it is not widely taught. In the early 1950s, however, the large computers of the time period were programmed with a form of CNC programming based on paper that had holes punched in a certain order.

The order of the holes would determine what the computer would do. This has since been replaced with modern programming, but there are some old computers that still exist that use CNC programming.

The original numerical control machines used manually punched-in paper to "program" a machine by giving it a set of instructions based on the holes punched in the paper. A man by the name of John Runyon created the first computerized punched-in paper to control one of the original numerical control machines.

The Air Force later standardized a language that could be used with any numerical control machine, which was accepted in June of 1956, the birth of computer numerical controlled languages.

Even though it is an old concept, there are still CNC programming books available for companies that program precision machinery. We have moved past punched paper and on to traditional programming methods, in which a microprocessor in the machine is directly programmed. The language is based off a Cartesian plane, which can direct the machine to any point on that plane precisely. Without CNC programming, many of our current precision machines would not exist, or at least be not as precise.

Comments page 0 of 0

Click here to add a comment

There are currently 0 comments to display.

Roseville, Laguna Niguel, Trenton, Yucaipa, El Reno, Modesto, Iowa, Gulfport, Hanahan, Maine, Hattiesburg, Harrison, Hendersonville, Rome, Beach Park, Las Vegas, Vermont, Henderson, Shoreline, Billings, Newark, Mattoon, Wisconsin Rapids, Minot, Bloomington, Connecticut, Louisiana, Sauk Village, Port Lavaca, Cadillac, Madera, Onalaska, Rutherford, Laurinburg, Lawrenceville, Aurora, Beckley, Los Banos, Baldwin, Matthews, Oswego, South Carolina, Grenada, Dover, Pico Rivera, High Point, Arizona, Griffin, Newberry, Mason, Depew, Tennessee, Lancaster, Marquette, San Marino, Mequon, Peru, Cortland, Minnesota, Houma, Tahlequah, Red Bank, Indiana, Spencer, Neosho, Eustis, Pontiac, Ashland, Ennis, Brigham City, Gadsden, Woonsocket

History of End User Programming

By Peter Hale
A History of End User Programming from the early development of the first personal computers to the World Wide Web, and the Semantic Web. The history is told in sections of decades from the 1960s to the present day.
[READ FULL ARTICLE]

5 Common Peripherals and Where to Spend

By Grady Pruitt
Putting together a computer system can cost a lot of money. Some common peripherals can be bought cheaply with no loss in quality of the system. Learn which peripherals to spend money on and which ones you can save on.
[READ FULL ARTICLE]

Machine Language Programming

By David Owino
Let us start by considering a set of four HCS08 instructions. They are the main subset of the load/store instructions. Two involve register A and two the H:X pair as a main participant. The register-A instruction's operand points to a single byte of memory to load from or store into.
[READ FULL ARTICLE]

What is the Difference Between a Software Engineer and a Computer Programmer?

By Pinky Mcbanon
The terms software engineer or computer programmer may be confusing to the average computer user. Most of us associate computer programs with the generic term 'Software'. To us it may seem that the terms are interchangeable. That is not so. The role played by a software engineer is significantly different from that of a computer programmer. Before learning what the difference between a software engineer and a computer programmer is, let us see what is meant by the term software engineering and how it relates to computer programming.
[READ FULL ARTICLE]